NSN 5306-00-701-8714
Coaxial Connector
0.762 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 885C699P1 for national stock number 5306007018714.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-701-8714.
-
MPN or Model
885C699P1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.512 inches -
Fastener Length
0.762 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Locking Feature
Pellet threads -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5985-00-173-7870 MPN 7534202P0001Electrical Dummy Load
- 5905-00-627-6924 MPN 7733291P119Noninductive Wire Wound Fixed Resistor
- 5905-00-782-4554 MPN 1522594-3Inductive Wire Wound Fixed Resistor
- 5905-00-945-7146 MPN 7433447-11Noninductive Wire Wound Fixed Resistor
- 5945-00-947-0360 MPN 7735924P1Electromagnetic Relay
- 5935-01-088-2110 MPN 7542228P0001Electrical Connector Bracket
- 5985-01-278-7205 MPN 7547083P0007Fixed Attenuator
- 5985-01-352-9419 MPN 7555183P0033Fixed Attenuator
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-701-8714 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
885C699P1 | Lockheed Martin Corp |