NSN 5306-00-709-2987
Coaxial Connector
1.093 inches fastener length, double hexagon w/hole head style, 0.254 inches head height, width between flats: between 0.465 inches and 0.475 inches .
Manufacturer part number VS2005-4-9 for national stock number 5306007092987.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-709-2987.
-
MPN or Model
VS2005-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
1.093 inches -
Head Style
Double hexagon w/hole -
Head Height
0.254 inches -
Width Between Flats
Between 0.465 inches and 0.475 inches -
Extended Washer Diameter
0.091 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-021-7245 MPN NAS1101-3H9Machine Screw
- 5305-00-079-2587 MPN AIC811-4-27Socket Head Cap Screw
- 5305-00-080-0150 MPN 3MA334CFA15-5Machine Screw
- 5305-00-308-1540 MPN AIC811-04-6Socket Head Cap Screw
- 5305-00-310-6419 MPN HT4028L8-11Close Tolerance Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-915-4969 MPN AIC1023H10-12Machine Screw
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-709-2987 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2005-4-9 | Arconic Global Fasteners & Rings, |
AIC260E4-9 | Sps Technologies, Llc |
EWB26-4-9 | Sps Technologies, Llc |
C305-4-9 | Sps Technologies, Llc |
C305-4-9 | Alcoa Global Fasteners, Inc. |
C305-4-9 | Lockheed Martin Corporation |
VS2005-4-9 | Alcoa Global Fasteners, Inc. |