NSN 5306-00-715-1308
Close Tolerance Hex Head Bolt
Between 0.828 inches and 0.875 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN175C6 for national stock number 5306007151308.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-715-1308.
-
MPN or Model
AN175C6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Fastener Length
Between 0.828 inches and 0.875 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 0.296 inches and 0.328 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.655 inches first hole and 0.687 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-671-5938 MPN NAS622CEBHook
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-105-9425 MPN NAS1635-08LL6PSocket Head Cap Screw
- 5305-00-141-6407 MPN NAS1191E02P5Socket Head Cap Screw
- 5305-00-173-8424 MPN NAS1216-08C7Machine Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-206-3663 MPN MILS7839Machine Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-715-1308 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175C6 | Aeronautical Standards Group |
MILB6812 | National Aerospace Standards |
MILB6812 | Military Specifications |