NSN 5306-00-719-3852
Coaxial Connector
4.681 inches fastener length, double hexagon w/hole head style, 0.711 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number MS21250-12058 for national stock number 5306007193852.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-719-3852.
-
MPN or Model
MS21250-12058
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.056 inches -
Fastener Length
4.681 inches -
Head Style
Double hexagon w/hole -
Head Height
0.711 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Single Shear Strength
108000 pounds per square inch -
Thread Diameter
0.750 inches -
Grip Length
3.625 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-409-3240 MPN BACB30LU8-31Close Tolerance Screw
- 5305-00-505-2668 MPN LS15262V3-24Machine Screw
- 5305-01-268-5973 MPN ST3M653C4-10AShoulder Screw
- 5305-01-435-5363 MPN BACB30LU8-18Close Tolerance Screw
- 5305-01-599-5426 MPN PMT1123-15Close Tolerance Screw
- 5306-00-059-1209 MPN 3M33-5-39AClose Tolerance Bolt
- 5306-01-044-6536 MPN VAL23607-5D14Shoulder Bolt
- 5306-01-054-3409 MPN C7521-5-10Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-719-3852 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-12058 | Sps Technologies, Llc |
MS21250-12058 | Arconic Global Fasteners & Rings, |
MS21250-12058 | Sps Technologies, Llc |
MS21250-12058 | Sps Technologies, Llc |
MS21250-12058 | Hi-shear Corporation |
MS21250-12058 | Alcoa Global Fasteners, Inc. |
MS21250-12058 | Huck International, Inc. |
MS21250-12058 | Lisi Aerospace Canada Corp |
VAL21013-12060 | Valley-todeco, Inc. |
MS21250-12058 | National Aerospace Standards |
MS21250-12058 | Military Standards |
MS21250-12058 | Huck Intl Inc |
MS21250-12058 | Mercury Aerospace Fasteners Inc |