NSN 5306-00-723-9680
Coaxial Connector
3.670 inches fastener length, 1.125 inches head diameter, 0.100 inches head height, width between flats: 0.873 inches .
Manufacturer part number 6-40694-1 for national stock number 5306007239680.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-723-9680.
-
MPN or Model
6-40694-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.460 inches -
Fastener Length
3.670 inches -
Head Diameter
1.125 inches -
Head Height
0.100 inches -
Width Between Flats
0.873 inches -
Grip Diameter
Between 0.4357 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
3.210 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.530 inches first hole -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000, cond c military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-009-0742 MPN 14-28206-1Aircraft Access Door
- 1560-00-073-9082 MPN 7-17003-3Aircraft Structural Plate
- 1560-00-140-2629 MPN 14-11558-2Vane Actuating Arm
- 1560-00-146-7729 MPN 6-28109-9Aircraft Access Door
- 1560-00-523-3690 MPN 14-23541-4Leading Edge Flap Seal
- 1560-00-766-6496 MPN 3-013202-4Canopy Edge Assembly
- 1560-00-771-3456 MPN 3-40125-503Main Landing Gea Uplock Assembly
- 1560-00-780-3211 MPN 2-54333-11Cabin Air Cuff Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-723-9680 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6-40694-1 | Northrop Grumman Technical Services, |
6-40694-1 | Northrop Grumman Systems Corporation |
6-40694-1 | M.s. Aerospace Inc. |
6-40694-1 | Apex Manufacturing Company, Inc. |
6-40694-1 | Caprice Engineering Company Inc |
6-40694-1 | Northrop Grumman Systems Corporation |