NSN 5306-00-725-7392
Coaxial Connector
1.422 inches fastener length, hexagon head style, 0.219 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 107R2596-1 for national stock number 5306007257392.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-725-7392.
-
MPN or Model
107R2596-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.422 inches -
Fastener Length
1.422 inches -
Head Style
Hexagon -
Head Height
0.219 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-106-4809 MPN A02S4139-1Hoist Suppo Fitting
- 1560-00-938-9787 MPN 107S1101-13Support Fitting
- 1560-01-018-6609 MPN 114H2200-33Hydraulic Lines Tube Support
- 5940-01-141-8816 MPN 145G5298-1Terminal Board Assembly
- 1560-01-225-6230 MPN A02S8092-28Link
- 1560-01-232-8951 MPN A02S4194-1Hinge Ramp To F Fitting Assembly
- 1560-01-418-3312 MPN 901-947-756-226Aircraft Window Panel
- 1560-01-464-2691 MPN 114S5911-35Aircraft Skin
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-725-7392 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
107R2596-1 | The Boeing Company |
107R2596-1 | The Boeing Company |