NSN 5306-00-734-8915
Wheel Bolt
Between 1.407 inches and 1.469 inches fastener length, hexagon head style, between 0.181 inches and 0.194 inches head height, width between flats: between 0.428 inches and 0.437 inches .
Manufacturer part number 1918748 for national stock number 5306007348915.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-734-8915.
-
MPN or Model
1918748
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.094 inches and 1.156 inches -
Fastener Length
Between 1.407 inches and 1.469 inches -
Head Style
Hexagon -
Head Height
Between 0.181 inches and 0.194 inches -
Width Between Flats
Between 0.428 inches and 0.437 inches -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 34.0 rockwell c -
Material
Steel comp 8630 -
Material Specification
Sae assn standard single material response -
Surface Treatment
Dichromate zinc -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-643-5865 MPN 1903145Inductive Wire Wound Fixed Resistor
- 5945-01-242-3075 MPN 1988140Solenoid Plunger
- 6105-00-635-4752 MPN 1869834Motor Field Winding
- 4820-00-740-9077 MPN 7409077Directional Control Linear Valve Slide
- 4820-00-756-2718 MPN 10951776-2Directional Control Linear Valve
- 5940-00-867-5245 MPN 8386477Feedthru Terminal
- 5935-01-102-7087 MPN 12303641Plug Dummy Connector
- 5935-01-159-2437 MPN 12310299Electrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-734-8915 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1918748 | General Motors Llc |
7348915 | U S Army Tank Automotive Command |
1918748 | Remy, Inc. |
1918748 | General Motors Corp |
1918748 | General Motors Corp |