NSN 5306-00-745-7725
Wheel Bolt
1.500 inches fastener length, hexagon head style, between 0.319 inches and 0.337 inches head height, width between flats: between 0.612 inches and 0.625 inches .
Manufacturer part number 360483S7S8 for national stock number 5306007457725.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-745-7725.
-
MPN or Model
360483S7S8
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.940 inches and 1.000 inches -
Fastener Length
1.500 inches -
Head Style
Hexagon -
Head Height
Between 0.319 inches and 0.337 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
Hole Diameter
0.094 inches -
Thread Diameter
0.438 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Material Specification
Sae gr 8 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-006-7540 MPN 11663156-2Electrical Plug Connector
- 5940-00-050-7055 MPN A278594BElectrical Conductor Ferrule
- 5935-00-201-5997 MPN 7716785Electrical Receptacle Connector
- 4820-00-260-5488 MPN CPR102361Check Valve
- 5905-00-280-0064 MPN 7374963Inductive Wire Wound Fixed Resistor
- 5905-00-367-4253 MPN 5346791Composition Fixed Resistor
- 5930-00-708-1967 MPN 7018338Control Pane Switch
- 5935-00-738-8345 MPN 7388345Electrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-745-7725 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
360483S7S8 | Ford Motor Co |
360483S7S8 | Ford Motor Co |
A296697 | U S Army Tank Automotive Command |