NSN 5306-00-757-6972
Coaxial Connector
Between 1.403 inches and 1.450 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number AIC4550-6-16 for national stock number 5306007576972.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-757-6972.
-
MPN or Model
AIC4550-6-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.393 inches and 0.460 inches -
Fastener Length
Between 1.403 inches and 1.450 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-8664 MPN AIC551C3-768Shoulder Screw
- 5305-00-372-9975 MPN AIC811-08-11Socket Head Cap Screw
- 5305-00-969-4758 MPN AIC1351-015Socket Head Cap Screw
- 5305-01-016-4343 MPN AIC812-3-6Machine Screw
- 5305-01-025-6408 MPN AIC812-02-7Machine Screw
- 5305-01-054-6252 MPN AIC9535-7-42Close Tolerance Screw
- 5305-01-169-7211 MPN LD111-0044-2418Close Tolerance Screw
- 5305-01-198-8522 MPN C7984-3-14Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-757-6972 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC4550-6-16 | Sps Technologies, Llc |
EWSB926-6A16 | Sps Technologies, Llc |
EWSB926-6A16 | Sps Technologies, Llc |
C4550-6-16 | Lockheed Martin Corporation |