NSN 5306-00-757-6973
Coaxial Connector
Between 1.979 inches and 2.026 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number AIC4550-7-24 for national stock number 5306007576973.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-757-6973.
-
MPN or Model
AIC4550-7-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.469 inches and 0.536 inches -
Fastener Length
Between 1.979 inches and 2.026 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-242-4813 MPN AIC812-02-3Machine Screw
- 5305-00-455-0416 MPN AIC792-5-13Close Tolerance Screw
- 5305-00-823-5807 MPN NAS1102-04-10Machine Screw
- 5305-00-838-7785 MPN NAS1101-08H14Machine Screw
- 5305-00-951-5443 MPN NAS1101C04-5Machine Screw
- 5305-00-971-7544 MPN AIC82-4-22Machine Screw
- 5305-01-085-6757 MPN AIC811-06-15Socket Head Cap Screw
- 5305-01-092-0089 MPN AIC984-5-11Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-757-6973 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC4550-7-24 | Sps Technologies, Llc |
EWSB926-7A24 | Sps Technologies, Llc |
EWSB926-7A24 | Sps Technologies, Llc |
C4550-7-24 | Lockheed Martin Corporation |