NSN 5306-00-762-6581
Coaxial Connector
2.197 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number 756400-1 for national stock number 5306007626581.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-762-6581.
-
MPN or Model
756400-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.562 inches and 0.582 inches -
Fastener Length
2.197 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel -
Material Specification
Mil-s-5000 military specification single material response or mil-s-6049 military specification single material response or mil-s-6098 military specification single material response or mil-s-8503 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-015-4215 MPN 3C11002-101Bracket Assembly
- 1560-00-035-2179 MPN 340730-5RUnderwing Fillet Assembly
- 1560-00-047-4906 MPN 308725Flange
- 5905-00-061-5355 MPN STSWR011F90904CFilm Fixed Resistor
- 5935-00-072-8210 MPN F12076-261Electrical Plug Connector
- 1560-00-085-7144 MPN 4J33198-103AFlap Track Top Liner
- 5930-00-105-7042 MPN 4P94005-101ALiquid Level Switch
- 1560-00-108-2115 MPN 4F55381-101CLogistic Detent
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-762-6581 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
756400-1 | Lockheed Martin Corporation |