NSN 5306-00-763-2033
Wheel Bolt
Between 1.309 inches and 1.318 inches fastener length, double hexagon w/hole head style, between 0.360 inches and 0.380 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 336C294P11 for national stock number 5306007632033.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-763-2033.
-
MPN or Model
336C294P11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.729 inches and 0.788 inches -
Fastener Length
Between 1.309 inches and 1.318 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.360 inches and 0.380 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
0.419 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.530 inches and 0.580 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
50t22 cagec 07482 mfr ref 2nd material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Uns
More from these suppliers
- 4920-00-220-5648 MPN 4098046-434P2Drive Shaft
- 1560-00-221-7186 MPN 9641M75G07Thrust Blocker Link
- 4920-00-511-3821 MPN 1C2585Engine Roll Bracket
- 5905-00-551-4239 MPN J118P3000AWire Wound Fixed Resistor
- 4920-00-570-8738 MPN 5793105-21G1Special Cable Assy
- 4920-00-718-0168 MPN 21C2375G002Water Applicator
- 4920-00-779-7656 MPN 21C934P010Aircraft Maintenance Fixture
- 5905-00-958-3428 MPN R984P1440AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-763-2033 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
336C294P11 | General Electric Company |