NSN 5306-00-763-4504
Close Tolerance Hex Head Bolt
Between 1.820 inches and 1.860 inches fastener length, hexagon head style, between 0.140 inches and 0.180 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 2006T09P01 for national stock number 5306007634504.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-763-4504.
-
MPN or Model
2006T09P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.470 inches and 0.600 inches -
Fastener Length
Between 1.820 inches and 1.860 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.180 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.073 inches first hole and 0.083 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.126 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
40.0 rockwell c and 44.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.650 inches first hole and 1.660 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-153-5251 MPN 21C938G002Aircraft Engine Accessories Maintenance Stand
- 4920-01-279-4184 MPN 21C8868P08Compressor Set
- 1680-01-372-7958 MPN 4022T59G02Remote Control Lever
- 4920-01-594-4351 MPN LMT-F414-9Aircraft Engine Maintenance Fixture
- 4920-01-519-3472 MPN 21C2449P15Airc Trunnion Block
- 5935-01-278-9038 MPN 5061T11P03Electrical Receptacle Connector
- 5306-01-075-1425 MPN R1057P3SLBolt
- 5306-01-487-3520 MPN J774P055AMachine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
![Mechanic Bill explains Close Tolerance Hex Head Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-763-4504 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2006T09P01 | General Electric Company |
Stock Check
![](/public/images/partscage_shelf3.png)