NSN 5306-00-765-2970
Coaxial Connector
3.374 inches fastener length, double hexagon w/hole head style, 0.923 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number MS21250H16030 for national stock number 5306007652970.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-765-2970.
-
MPN or Model
MS21250H16030
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.489 inches and 1.509 inches -
Fastener Length
3.374 inches -
Head Style
Double hexagon w/hole -
Head Height
0.923 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
0.222 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Hole Configuration Style
Round -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-086-2403 MPN MS3116P20-16PElectrical Plug Connector
- 5905-00-088-0635 MPN RW59G471Inductive Wire Wound Fixed Resistor
- 5985-00-088-5418 MPN MX1884URadio Frequency Transmission Line Seal
- 5935-00-090-7029 MPN MS27484T16A55SElectrical Plug Connector
- 5905-00-104-5755 MPN MS35043-39Composition Fixed Resistor
- 5940-00-113-9825 MPN MS20659-141Lug Terminal
- 5935-00-149-2901 MPN MS3106A14S79Electrical Plug Connector
- 5930-00-197-2289 MPN MS27993-8Sensitive Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-765-2970 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250H16030 | Military Standards |
Stock Check
- NS: 7
- NE: 182