NSN 5306-00-765-2982
Coaxial Connector
2.306 inches fastener length, double hexagon w/hole head style, 0.711 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number MS21250H12020 for national stock number 5306007652982.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-765-2982.
-
MPN or Model
MS21250H12020
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.046 inches and 1.066 inches -
Fastener Length
2.306 inches -
Head Style
Double hexagon w/hole -
Head Height
0.711 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Hole Configuration Style
Round -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-158-4810 MPN MS3106F40-56PElectrical Plug Connector
- 5905-00-173-9128 MPN MS35051-48Inductive Wire Wound Fixed Resistor
- 5935-00-259-0048 MPN MS3106A20-15SElectrical Plug Connector
- 5935-00-259-9562 MPN MS3106E20-7SElectrical Plug Connector
- 5930-00-356-4732 MPN MS27408-4EToggle Switch
- 5935-00-451-7565 MPN MS3106E28-2SElectrical Plug Connector
- 5935-00-481-2027 MPN MS27497E12B98PElectrical Receptacle Connector
- 5935-00-500-9968 MPN MS27473T16F35SBElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-765-2982 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250H12020 | Military Standards |