NSN 5306-00-765-4633
Close Tolerance Hex Head Bolt
1.754 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.438 inches .
Manufacturer part number 51B464-4A23 for national stock number 5306007654633.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-765-4633.
-
MPN or Model
51B464-4A23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
1.754 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-069-8023 MPN 6-84008-1CAircraft Structural Component Support
- 1560-00-070-6422 MPN 4-24210-2Aircraft Trailing Edge
- 1560-00-225-0814 MPN 4-10336-16Aircraft Access Cover
- 1560-00-472-1833 MPN 6-023448-2Wing Parts Kit
- 1560-00-686-2024 MPN 3-11233-17Fuselage Firewall
- 1560-00-709-7225 MPN 2-25116-502Aileron Inboard Seal
- 1680-00-710-8839 MPN 2-70245-1Cal Uplock Assembly
- 1560-00-784-8263 MPN 2-25100-606Aileron
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
![Mechanic Bill explains Close Tolerance Hex Head Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-765-4633 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B464-4A23 | Northrop Grumman Technical Services, |
51B464-4A23 | Northrop Grumman Systems Corporation |
51B464-4A23 | Huck International, Inc. |
51B464-4A23 | Huck Intl Inc |
Stock Check
![](/public/images/partscage_shelf3.png)