NSN 5306-00-775-6394
Coaxial Connector
1.189 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number NAS1588-5-11 for national stock number 5306007756394.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-775-6394.
-
MPN or Model
NAS1588-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.877 inches -
Fastener Length
1.189 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Material Specification
Nas 1597 cond f assn standard single material response -
Thread Series Designator
Unf -
Specification Data
80205-nas1588 professional/industrial association standard
More from these suppliers
- 5940-00-204-6858 MPN NAS704S3Stud Terminal
- 1560-01-187-5286 MPN AIA/NAS NASM21603-L3-24-3Nut Gang
- 5940-01-375-3647 MPN NAS1063A10-3MLSTerminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-053-1079 MPN MS35199-42Machine Screw
- 5305-00-054-2264 MPN MS24678-57CSocket Head Cap Screw
- 5305-00-059-4857 MPN NAS1101-02-5Machine Screw
- 5305-00-069-4942 MPN NAS2806-15Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-775-6394 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1588-5-11 | National Aerospace Standards |