NSN 5306-00-775-8746
Coaxial Connector
1.187 inches fastener length, hexagon head style, 0.062 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 300-333030 for national stock number 5306007758746.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-775-8746.
-
MPN or Model
300-333030
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.187 inches -
Head Style
Hexagon -
Head Height
0.062 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3112 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.068 inches first hole -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626, cond c4 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-135-4963 MPN 310-310556-1Forwor Engine Mount
- 1560-00-168-5734 MPN 288-829010-602Wing Assembly
- 5985-00-456-7066 MPN ST4130214HE0001Special Attenuator
- 1560-00-612-4799 MPN 249-48704Fuel Du Handle Assy
- 1560-00-612-4913 MPN 249-33735Landing Gear Control Sector
- 1680-00-824-6371 MPN 305-526032Flap Cylinder Assy
- 1560-00-906-8639 MPN 253-31854-9Retainer
- 1560-00-959-5666 MPN 288-310006-201Aircraft Access Door
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-775-8746 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
300-333030 | Rockwell International Corp |