NSN 5306-00-780-7022
Coaxial Connector
Between 1.142 inches and 1.172 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 4819417-1 for national stock number 5306007807022.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-780-7022.
-
MPN or Model
4819417-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.657 inches -
Fastener Length
Between 1.142 inches and 1.172 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3106 inches and 0.3112 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.312 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel -
Material Specification
Mil-s-5626 cond d military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-098-7090 MPN 2005270R475Tank F Cap Assembly
- 1560-00-179-1254 MPN 5660806-701Fuselage Section
- 1560-00-197-5016 MPN 3115125Aircraft Structural Plate
- 1680-00-199-6827 MPN 7958534-504Latch Assembly
- 1560-00-199-8484 MPN 5115257Aircraft Structural Component Support
- 1560-00-214-7333 MPN 5330087-502Aircraft Tip
- 1560-00-323-3173 MPN 3446114-1Fitting
- 1560-00-658-0017 MPN 5442517-130Slat Assy Rh
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-780-7022 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4819417-1 | Boeing Company, The |
67C45334-01 | Warner Robins Air Logistics Center |
67C45334 | Warner Robins Air Logistics Center |