NSN 5306-00-782-8714
Coaxial Connector
2.090 inches fastener length, hexagon head style, 0.080 inches head height, width between flats: 0.540 inches .
Manufacturer part number 3F31095-101 for national stock number 5306007828714.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-782-8714.
-
MPN or Model
3F31095-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.320 inches -
Fastener Length
2.090 inches -
Head Style
Hexagon -
Head Height
0.080 inches -
Width Between Flats
0.540 inches -
Grip Diameter
Between 0.3738 inches and 0.3746 inches -
Thread Diameter
0.375 inches -
Grip Length
1.770 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758, f4 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-197-6224 MPN NAS1102-06-6BMachine Screw
- 5305-00-508-3081 MPN LS15265V3-34Close Tolerance Screw
- 5305-01-193-6859 MPN 1202-3-6Close Tolerance Screw
- 5305-01-207-1688 MPN PBF1375-2108Machine Screw
- 5305-01-320-7316 MPN BACB30SZ8-10Machine Screw
- 5305-01-365-0404 MPN BACB30LK3-13Close Tolerance Screw
- 5305-01-387-3768 MPN PBF1416-5-62Close Tolerance Screw
- 5305-01-445-6874 MPN PBF1570-4-8LClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-782-8714 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3F31095-101 | Lockheed Martin Corporation |
PBF1095 | Sps Technologies, Llc |