NSN 5306-00-795-4925
Wheel Bolt
Assemble spacer p/n 8159341 on bolt before rolling thread.
Manufacturer part number 8159340 for national stock number 5306007954925.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-795-4925.
-
MPN or Model
8159340
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
2.875 inches -
Head Style
Dished hexagon -
Head Height
0.656 inches -
Width Between Flats
1.125 inches -
Hole Diameter
0.094 inches -
Shank Unthreaded Hole Diameter
0.250 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
1.750 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
14 -
Hardness Rating
28.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.312 inches first hole -
Askewed Head Angle
30.0 degrees -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp 8642h -
Material Specification
Aisi assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-500-5012 MPN 6740053-28Electrical Connector Cover
- 4920-00-509-5626 MPN 6796365Air Inlet Engine Test Duct
- 5930-00-548-7462 MPN 5161406Rotary Switch
- 5930-00-642-9069 MPN 1507765Pressure Switch
- 1680-00-651-1172 MPN 6505116Solenoid Housing
- 4820-00-708-9506 MPN 9032823Special Shaped Actuator Valve Diaphragm
- 5905-00-814-6586 MPN 8560698-005Nonprecision Wire Wound Variable Resistor
- 5930-00-857-5063 MPN 7854889Sensitive Switch
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-795-4925 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8159340 | General Motors Corp |
8159340 | General Motors Corp |
8159340 | Progress Rail Locomotive Inc. |