NSN 5306-00-797-9338
Wheel Bolt
Shank of bolt is bent 3/16 in. Plus 1/16 in. At 4-3/16 in. Plus or minus 1/32 in. From bearing surface of head and straightened at both ends.
Manufacturer part number 7979338 for national stock number 5306007979338.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-797-9338.
-
MPN or Model
7979338
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.000 inches and 2.125 inches -
Fastener Length
10.250 inches -
Head Style
Hexagon -
Head Height
0.562 inches -
Width Between Flats
Between 1.292 inches and 1.313 inches -
Thread Diameter
0.875 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
133000 pounds per square inch -
Hardness Rating
27.0 rockwell c and 34.0 rockwell c -
Material
Steel comp 3140h -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-8981 MPN 7720476Electrical Plug Connector
- 4820-00-628-0983 MPN 6280983Drain Cock
- 5905-00-777-8491 MPN 8710856Inductive Wire Wound Fixed Resistor
- 5935-01-083-3111 MPN 12287248Electrical Receptacle Connector
- 5935-01-102-7021 MPN 12303843Connector Adapter
- 5935-01-102-7024 MPN 12303848Connector Adapter
- 5935-01-223-0497 MPN 12298895Electrical Receptacle Connector Body
- 5940-01-272-5800 MPN 12341639Stud Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-797-9338 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7979338 | U S Army Tank Automotive Command |