NSN 5306-00-803-6402
Close Tolerance Hex Head Bolt
1.812 inches fastener length, knurled no. 4 head style, 0.312 inches head diameter, head height: 0.250 inches .
Manufacturer part number 3817085-1 for national stock number 5306008036402.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-803-6402.
-
MPN or Model
3817085-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.316 inches and 0.336 inches -
Fastener Length
1.812 inches -
Head Style
Knurled no. 4 -
Head Diameter
0.312 inches -
Head Height
0.250 inches -
Grip Diameter
Between 0.5145 inches and 0.5155 inches -
Shank Unthreaded Hole Diameter
0.104 inches first hole and 0.111 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 1.376 inches and 1.396 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.656 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-125-5581 MPN 1117356Aircraft Structural Component Support
- 1680-00-368-4983 MPN 5117163Aircraft Seat
- 1560-00-448-3149 MPN 5115216-1Aircraft Door
- 1680-00-607-1761 MPN 3444043-507Rotary Electro-mechanical Actuator
- 1560-00-657-5431 MPN 4671419-502Aircraft Structural Component Fitting
- 5905-01-224-7160 MPN 1D53288-1Resistor Assembly
- 5305-00-144-3759 MPN 1027301-10-12Machine Screw
- 5305-00-346-7404 MPN 2448661-503Bomb Ejector Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-803-6402 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3817085-1 | Boeing Company, The |
5817083-501 | Boeing Company, The |
3817085-501 | Boeing Company, The |
5817083-501 | Boeing Company, The |
3817085-1 | Boeing Company, The |