NSN 5306-00-803-9408
Wheel Bolt
1.125 inches fastener length, flat countersunk head style, 0.507 inches head diameter, shank unthreaded hole diameter: 0.076 inches first hole and 0.086 inches first hole.
Manufacturer part number 361372-2 for national stock number 5306008039408.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-803-9408.
-
MPN or Model
361372-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.125 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
1.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.271 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unef
More from these suppliers
- 1560-00-009-5998 MPN 4F77204-194AFairing Beam Assembly
- 1560-00-009-9524 MPN 4F72654-121AFire Shield Compartme Insulation
- 4820-00-015-2135 MPN 3H90017-101Safety Relief Valve
- 1560-00-021-8537 MPN 3A9906-101Aircraft Thermal Insulation Pipe Covering
- 1560-00-022-0223 MPN 764561-11Bracket Assembly
- 1560-00-055-6853 MPN 769923-59Emergency Suct Tube
- 1560-00-084-4935 MPN 4C33046-101BRear Beam Support Assembly
- 1560-00-097-6822 MPN 4T12101-101AAircraft Access Cover
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-803-9408 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
361372-2 | Lockheed Martin Corporation |