NSN 5306-00-804-9399
Wheel Bolt
3.125 inches fastener length, hexagon head style, between 0.455 inches and 0.483 inches head height, width between flats: between 1.100 inches and 1.125 inches .
Manufacturer part number 90444-625 for national stock number 5306008049399.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-804-9399.
-
MPN or Model
90444-625
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
3.125 inches -
Head Style
Hexagon -
Head Height
Between 0.455 inches and 0.483 inches -
Width Between Flats
Between 1.100 inches and 1.125 inches -
Thread Diameter
0.750 inches -
Grip Length
2.000 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 -
Material Specification
Mil-s-6758, cond c or d military specification single material response or ams 6348 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unrc
More from these suppliers
- 5930-00-053-4805 MPN B508722-11Push Switch
- 5940-00-155-7648 MPN B4725412Lug Terminal
- 5935-00-260-4348 MPN 506895-24-22SElectrical Plug Connector
- 5935-00-490-4530 MPN 513043-28-16PElectrical Plug Connector
- 5905-01-149-9343 MPN 423340-1Wire Wound Fixed Resistor
- 5945-01-189-8757 MPN 5SE00664-2RSpecial Relay
- 4820-01-442-0905 MPN 5SE00526-3Ball Valve
- 5305-00-150-9132 MPN 1176-4-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-804-9399 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
90444-625 | Naval Air Warfare Center Aircraft |