NSN 5306-00-809-2447
Close Tolerance Hex Head Bolt
Between 0.820 inches and 0.840 inches fastener length, hexagon head style, between 0.020 inches and 0.120 inches head height, width between flats: between 0.430 inches and 0.480 inches .
Manufacturer part number 324B268P001 for national stock number 5306008092447.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-809-2447.
-
MPN or Model
324B268P001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.330 inches and 0.360 inches -
Fastener Length
Between 0.820 inches and 0.840 inches -
Head Style
Hexagon -
Head Height
Between 0.020 inches and 0.120 inches -
Width Between Flats
Between 0.430 inches and 0.480 inches -
Grip Diameter
Between 0.2490 inches and 0.2493 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.480 inches and 0.490 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
63.0 microinches grip -
Material
Steel comp 303se -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-126-5892 MPN R984P0290AInductive Wire Wound Fixed Resistor
- 4920-00-571-7684 MPN 21C1283G002Interface Device Adapter Assembly
- 4920-00-632-0122 MPN 688D850G1Aircraft Fuel System Components Fixture
- 4920-00-792-3223 MPN 518D574G1Electrical Special Purpose Cable Assembly
- 4820-00-894-5007 MPN 332C792P3Flow Control Valve
- 5905-00-957-8826 MPN R983P1372CFilm Fixed Resistor
- 4920-01-182-6210 MPN SWE18902Aircraft Engine Maintenance Fixture
- 5905-01-249-5804 MPN J350P5900AInductive Wire Wound Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-809-2447 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
324B268P001 | General Electric Company |
324B268P1 | General Electric Company |
324B268P001 | General Electric Company |
324B268P001 | General Electric Co |