NSN 5306-00-809-7478
Wheel Bolt
2.375 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9146-31 for national stock number 5306008097478.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-809-7478.
-
MPN or Model
MS9146-31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.685 inches -
Fastener Length
2.375 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.690 inches and 1.750 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-104-5756 MPN MS35043-159Composition Fixed Resistor
- 5935-00-177-2001 MPN MS25183A12S3SXCElectrical Plug Connector
- 5935-00-201-7261 MPN MS27473T8A985Electrical Plug Connector
- 5935-00-222-7838 MPN MS3106B40-1PElectrical Plug Connector
- 5940-00-230-0555 MPN MS21003-27Lug Terminal
- 5935-00-238-4156 MPN MS3102A24-28PWElectrical Receptacle Connector
- 5935-00-259-7348 MPN MS3100C18-22PElectrical Receptacle Connector
- 5940-00-283-5280 MPN MS25036-100Lug Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-809-7478 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9146-31 | Military Standards |