NSN 5306-00-813-8050
Coaxial Connector
Between 2.041 inches and 2.071 inches fastener length, double hexagon w/hole head style, 0.388 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS626-23 for national stock number 5306008138050.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-813-8050.
-
MPN or Model
NAS626-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.644 inches and 0.694 inches -
Fastener Length
Between 2.041 inches and 2.071 inches -
Head Style
Double hexagon w/hole -
Head Height
0.388 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.427 inches and 1.447 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8735 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas626 professional/industrial association standard
More from these suppliers
- 5930-01-054-0574 MPN NAS1072-3Switch Guard
- 1560-01-520-7463 MPN NAS3727-15Cord Assembly
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-021-3918 MPN MS35308-355Hexagon Head Cap Screw
- 5305-00-051-6532 MPN MS35190-349Machine Screw
- 5305-00-052-8887 MPN MS24630-24Tapping Screw
- 5305-00-053-1110 MPN MS24621-5Tapping Screw
- 5305-00-057-4373 MPN NAS1622-1Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-813-8050 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS626-23 | National Aerospace Standards |