NSN 5306-00-814-5532
Close Tolerance Hex Head Bolt
Between 1.140 inches and 1.187 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174CH11A for national stock number 5306008145532.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-814-5532.
-
MPN or Model
AN174CH11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 1.140 inches and 1.187 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.734 inches and 0.766 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-004-2063 MPN MILR55182-6Film Fixed Resistor
- 5905-00-005-2867 MPN RC42BE153JComposition Fixed Resistor
- 5905-00-005-2880 MPN RN55C5112FTXFilm Fixed Resistor
- 5905-00-005-8911 MPN RNC60C1822FRFilm Fixed Resistor
- 5935-00-009-6381 MPN M83723/72R14156Electrical Receptacle Connector
- 5935-00-018-3607 MPN MIL-C-5015Electrical Receptacle Connector
- 5905-00-021-6259 MPN MILR39008-1Composition Fixed Resistor
- 5930-00-031-4172 MPN S3JM8Rotary Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-814-5532 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174CH11A | Aeronautical Standards Group |
B6812 | Military Specifications |
AN174C11A | Aeronautical Standards Group |