NSN 5306-00-816-5385
Coaxial Connector
0.781 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: 0.438 inches .
Manufacturer part number 3M33-4-5 for national stock number 5306008165385.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-816-5385.
-
MPN or Model
3M33-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.369 inches -
Fastener Length
0.781 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.624 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-018-8617 MPN 53-11004-18Trailing Edge Web
- 1560-00-053-2242 MPN 32-11036-11Aircraft Access Cover
- 1560-00-073-1505 MPN 53-46502-1Aircraft Door
- 1560-00-123-9419 MPN 53-07450-3Air Blanket Assembly
- 1560-00-197-3722 MPN 32-311670-17Canopy Water Diverter
- 1560-00-224-0120 MPN 3828470-1Mirror Support Assy
- 1560-00-231-9209 MPN 53L580001Foam Assembly
- 1680-00-262-0435 MPN 68B658001-103Push-pull Control Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-816-5385 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-4-5 | Boeing Company, The |