NSN 5306-00-820-5937
Wheel Bolt
0.187 in. Dia hole drilled on longitudinal axis of head 0.172 in. Deep.
Manufacturer part number 492J65 for national stock number 5306008205937.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-820-5937.
-
MPN or Model
492J65
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
0.900 inches -
Head Style
Double hexagon w/hole -
Head Height
0.250 inches -
Width Between Flats
Between 0.431 inches and 0.438 inches -
Extended Washer Diameter
Between 0.650 inches and 0.660 inches -
Extended Washer Thickness
Between 0.058 inches and 0.066 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.312 inches -
Grip Length
0.150 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Nonstandard Thread Pitch Diameter
+0.2980/+0.2999 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
25.0 rockwell c and 37.0 rockwell c -
Minimum Yield Strength
130000 pounds per square inch -
Hole Configuration Style
Hexagon longitudinal hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8617 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-318-3701 MPN A77525Safety Relief Valve
- 4920-00-490-7273 MPN 923134Pilot And Nut
- 6145-01-322-7598 MPN 93-72000-00Wire Braid
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-820-5937 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
492J65 | Curtiss-wright Controls, Inc |
492J65 | Curtiss-wright Controls, Inc |