NSN 5306-00-821-3882
Wheel Bolt
Between 0.490 inches and 0.510 inches fastener length, double hexagon w/hole head style, between 0.250 inches and 0.270 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number R112P2UL for national stock number 5306008213882.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-821-3882.
-
MPN or Model
R112P2UL
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.510 inches -
Fastener Length
Between 0.490 inches and 0.510 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.250 inches and 0.270 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.190 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Nonstandard Thread Pitch Diameter
+0.1644/+0.1677 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 33.0 rockwell c -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-698-7095 MPN 1C2601-9Aircraft Engine Maintenance Fixture
- 4920-00-831-6809 MPN 1C5627G01Aircraft Engine Maintenance Fixture
- 5905-00-957-4679 MPN R983P5111BFilm Fixed Resistor
- 5905-00-958-3518 MPN R984P3851AInductive Wire Wound Fixed Resistor
- 4920-01-061-0377 MPN 21C5846G01Aircraft Maintenance Fixture
- 4920-01-094-6403 MPN 21C8035G03Drive Shaft Wrench
- 4920-01-108-3484 MPN 21C7081G02Engin Lifting Sling
- 4920-01-133-3495 MPN 21C7193P05Vane Grinding Dampener
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-821-3882 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R112P2UL | General Electric Company |
R112P2UL | General Electric Co |