NSN 5306-00-821-6519
Wheel Bolt
Between 1.052 inches and 1.072 inches fastener length, double hexagon w/hole head style, between 0.365 inches and 0.385 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number R178P9 for national stock number 5306008216519.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-821-6519.
-
MPN or Model
R178P9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
1a -
Thread Direction
Right-hand -
Thread Length
Between 0.864 inches and 0.944 inches -
Fastener Length
Between 1.052 inches and 1.072 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.365 inches and 0.385 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.128 inches and 0.188 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches grip -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-119-2330 MPN 1C5794G03Aircraft Engine Maintenance Fixture
- 4920-00-193-2272 MPN 1C5671P07Rotor Bl Cover Assy
- 4920-00-311-3261 MPN 1C2187Aft Engine Support
- 4920-00-471-1044 MPN 1C5757P35Support S Foot Assy
- 4920-00-895-5414 MPN 21C912G002Aircraft Engine Test Set
- 4920-00-939-1403 MPN 21C2767G003Aircraft Engine Maintenance Fixture
- 5905-00-959-8965 MPN R983P7151CFilm Fixed Resistor
- 4920-01-091-2898 MPN 21C8145G02Rotor Holding Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-821-6519 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R178P9 | General Electric Company |
R178P9U | General Electric Company |
R178P9 | General Electric Co |
R178P9U | General Electric Co |