NSN 5306-00-829-6856
Close Tolerance Hex Head Bolt
3.750 inches fastener length, undercut hexagon head style, between 0.380 inches and 0.410 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number 204-011-166-7 for national stock number 5306008296856.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-829-6856.
-
MPN or Model
204-011-166-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
3.750 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.380 inches and 0.410 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8731 inches and 0.8741 inches -
Thread Diameter
0.875 inches -
Grip Length
3.000 inches -
Thready Qty Per Inch (tpi)
14 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-338-2078 MPN 51B581-5-12Close Tolerance Screw
- 5305-01-138-4707 MPN HT4025L613Close Tolerance Screw
- 5305-01-183-5873 MPN ST3M733-3D4Close Tolerance Screw
- 5305-01-386-2933 MPN PBF1484-5-9Close Tolerance Screw
- 5305-01-624-8909 MPN BACS12GX06A7Hexagon Head Cap Screw
- 5305-01-646-1357 MPN JSFB12V04-11Machine Screw
- 5305-01-646-1430 MPN JSFB15V4-9Close Tolerance Screw
- 5306-01-043-5708 MPN PBF1079-7-12Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-829-6856 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
204-011-166-7 | Duncan Industries, Inc. |
204-011-166-007 | Bell Helicopter Textron Inc. |
204-011-166-1 | Bell Helicopter Textron Inc. |
204-011-166-7 | Bell Helicopter Textron Inc. |
204-011-166-001 | Bell Helicopter Textron Inc. |
204-011-166-1 | Ruag Aerospace Services Gmbh |
204-011-166-7 | Sps Technologies, Llc |
204-011-166-1 | Sps Technologies, Llc |
204-011-166-1 | Ruag Aerospace Services Gmbh |