NSN 5306-00-832-3740
Close Tolerance Hex Head Bolt
Between 1.020 inches and 1.040 inches fastener length, double hexagon w/hole head style, between 0.250 inches and 0.270 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 3008T57P02 for national stock number 5306008323740.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-832-3740.
-
MPN or Model
3008T57P02
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Unit Weight (Est.)
10 lb -
Thread Class
1a -
Thread Direction
Right-hand -
Thread Length
Between 0.415 inches and 0.455 inches -
Fastener Length
Between 1.020 inches and 1.040 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.250 inches and 0.270 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Grip Diameter
Between 0.2499 inches and 0.2501 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
195000 pounds per square inch -
Hardness Rating
42.0 rockwell c and 46.0 rockwell c -
Material
Steel -
Material Specification
Ams 6304 assn standard single material response -
Surface Treatment
Nickel -
Surface Treatment Specification
Ams 2424 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-108-3474 MPN 21C7085G01Circuit Tester
- 5975-01-324-5968 MPN 4069T70G01Cable Hanger
- 1560-01-490-3486 MPN 4146T36P01Wear Strip
- 4920-01-242-9670 MPN 21C1247G001Test Screen Inlet
- 4920-00-111-2979 MPN 21C1396G001 Assembling Fixture
- 6110-00-994-4616 MPN 538D888P1Constant Frequency Control
- 5305-01-020-7852 MPN 4047T84P04Socket Head Cap Screw
- 5306-01-168-8963 MPN J643P15ABolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-832-3740 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3008T57P02 | General Electric Company |