NSN 5306-00-832-9775
Coaxial Connector
2.812 inches fastener length, round w/wrench flats chamfered head style, 1.125 inches head diameter, head height: 0.312 inches .
Manufacturer part number 4823126-501 for national stock number 5306008329775.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-832-9775.
-
MPN or Model
4823126-501
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.889 inches -
Fastener Length
2.812 inches -
Head Style
Round w/wrench flats chamfered -
Head Diameter
1.125 inches -
Head Height
0.312 inches -
Width Between Flats
0.748 inches -
Grip Diameter
Between 0.6234 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.125 inches first hole -
Material
Steel -
Material Specification
Ms555-fscm 88277 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps928 fscm 88277 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-046-3754 MPN 4115223-2Aircraft Plate
- 1560-00-046-5275 MPN 5006059-8Hatch Assembly
- 1560-00-396-7705 MPN 4142959-1 Mi Outlet Assembly
- 1560-00-805-6177 MPN 5825397-19Adapter
- 1560-00-928-9183 MPN 3822373-3Bell Crank
- 4920-01-107-9370 MPN PWA25926Adapter
- 1560-01-190-8835 MPN 3554311-5Fuel Filter Clip
- 1560-01-344-0898 MPN 17P3A1639-501Aircraft Structural Plate
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-832-9775 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4823126-501 | Boeing Company, The |
4823126-1 | Boeing Company, The |
4823126-501 | Mix Tool Co |