NSN 5306-00-834-3033
Close Tolerance Hex Head Bolt
1.531 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174CH14 for national stock number 5306008343033.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-834-3033.
-
MPN or Model
AN174CH14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.531 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Grip Length
1.062 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.374 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-036-6755 MPN MT447APS31Electrical Equipment Mounting Base
- 5985-00-093-5897 MPN UG214UWaveguide Flange
- 5935-00-195-9134 MPN AN3108A14S2SElectrical Plug Connector
- 5935-00-201-7506 MPN AN3102E28-17PElectrical Receptacle Connector
- 5935-00-201-8412 MPN AN3102E28-15SWElectrical Receptacle Connector
- 5935-00-283-7253 MPN AN3102C18-1PElectrical Receptacle Connector
- 5935-00-296-8004 MPN AN3116-2Electrical Plug Connector
- 5305-00-144-3988 MPN AN505-10-32Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-834-3033 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174CH14 | Aeronautical Standards Group |