NSN 5306-00-838-2292
Wheel Bolt
The item is non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
Manufacturer part number P87882-13 for national stock number 5306008382292.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-838-2292.
-
MPN or Model
P87882-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.000 inches -
Fastener Length
13.250 inches -
Head Style
Hexagon -
Head Height
Between 0.531 inches and 0.563 inches -
Width Between Flats
Between 1.269 inches and 1.312 inches -
Thread Diameter
0.875 inches -
Grip Length
11.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Criticality Code Justification
Feat -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758, cond d4 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-044-2783 MPN 412222-1Lever Switch
- 5950-00-165-3666 MPN 618927-1Power Autotransformer Transformer
- 5935-01-186-0137 MPN 5SE01354-25Electrical Plug Connector
- 5940-01-227-5306 MPN 425419-2Quick Disconnect Terminal
- 5305-00-150-9501 MPN 1177B6-5Machine Screw
- 5305-00-151-9508 MPN 509440E6Socket Head Cap Screw
- 5305-01-004-8742 MPN 509440-616CSocket Head Cap Screw
- 5306-01-658-0977 MPN 3234AS146-6Machine Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-838-2292 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
P87882-13 | Naval Air Warfare Center Aircraft |