NSN 5306-00-844-3337
Wheel Bolt
Between 0.891 inches and 0.938 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number 546724 for national stock number 5306008443337.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-844-3337.
-
MPN or Model
546724
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.891 inches and 0.938 inches -
Fastener Length
Between 0.891 inches and 0.938 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 33.0 rockwell c -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-317-6014 MPN 81827-2Power Transformer
- 5905-00-333-8623 MPN 5E4720/11-75R0Film Fixed Resistor
- 5905-00-428-0157 MPN 6E4720-57-0015Film Fixed Resistor
- 5945-00-937-5006 MPN 10983Hybrid Relay
- 5930-01-424-4921 MPN 808445-1Thermostatic Switch
- 5950-00-246-5148 MPN 320062Electrical Coil
- 5950-01-406-3840 MPN SV808909-1Power Transformer
- 5935-01-328-8617 MPN 793516-2Electrical Connector Backshell
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-844-3337 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
546724 | Hamilton Sundstrand Corporation |