NSN 5306-00-845-2478
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, 2.171 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42B21A for national stock number 5306008452478.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-845-2478.
-
MPN or Model
AN42B21A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
2.171 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.4380 inches -
Overall Length
2.812 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Center Of Eye To Shank End
2.562 inches -
Eye Outside Width
0.437 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-6049 military specification 2nd material response or mil-s-6050 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6758 military specification 5th material response or ams 6300 assn standard 6th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-423-0215 MPN NAS6706D19Aircraft Structural Component Support
- 5305-00-008-9117 MPN NAS1190E04T4LSocket Head Cap Screw
- 5305-00-051-2330 MPN NASM51958Machine Screw
- 5305-00-052-4046 MPN NAS1081-6D12Setscrew
- 5305-00-057-0537 MPN MS51958-53Machine Screw
- 5305-00-064-4375 MPN NAS1506-16Close Tolerance Screw
- 5305-00-065-7447 MPN NAS623-4-42Machine Screw
- 5305-00-068-0537 MPN NAS609C3H14Socket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-845-2478 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42B21A | National Aerospace Standards |
AN42B21A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.