NSN 5306-00-846-9547
Wheel Bolt
0.562 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number MS9061-07 for national stock number 5306008469547.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-846-9547.
-
MPN or Model
MS9061-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
0.491 inches -
Fastener Length
0.562 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.250 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Special Test Features
Noone -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-278-6555 MPN 2264248Hydraulic System Bleeder Valve
- 5905-00-737-3348 MPN 1910179Inductive Wire Wound Fixed Resistor
- 5930-00-794-4667 MPN 1513268Thermostatic Switch
- 4820-01-303-8980 MPN 3311820Valve Assembly
- 6110-00-679-7400 MPN 5182181Louver Controller
- 6110-00-861-1948 MPN 1938153Generator Control
- 5305-00-011-0600 MPN 110600Machine Screw
- 5305-00-014-5327 MPN 145327Tapping Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-846-9547 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9061-07 | Zf Industrieantriebe Witten Gmbh |
MS9061-07 | Military Standards |
6735862 | General Motors Corp |
6735862 | Allison Transmission, Inc. |