NSN 5306-00-849-0446
Wheel Bolt
Between 0.678 inches and 0.698 inches fastener length, double hexagon w/hole head style, between 0.250 inches and 0.270 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number R448P07U for national stock number 5306008490446.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-849-0446.
-
MPN or Model
R448P07U
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.698 inches -
Fastener Length
Between 0.678 inches and 0.698 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.250 inches and 0.270 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Ams 5628 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-574-1494 MPN 21C3616G001Cam Follower Holding Fixture
- 4920-00-770-1170 MPN 21C599G001Aircraft Components Test Set Subassembly
- 4920-00-907-2664 MPN 21C4010P010Aircraft Maintenance Fixture
- 5905-00-918-2918 MPN R999P7000AInductive Wire Wound Fixed Resistor
- 5905-00-957-4594 MPN R983P1502BFilm Fixed Resistor
- 4920-01-003-3164 MPN 21C5186P03Check Seating Fixture
- 4920-01-060-4099 MPN 21C5016P03Outer Plate
- 5905-01-114-2247 MPN J165P4220AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-849-0446 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R448P07U | General Electric Company |