NSN 5306-00-849-9332
Coaxial Connector
3.020 inches fastener length, double hexagon extended washer head style, 0.388 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 726726-2 for national stock number 5306008499332.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-849-9332.
-
MPN or Model
726726-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.645 inches -
Fastener Length
3.020 inches -
Head Style
Double hexagon extended washer -
Head Height
0.388 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.099 inches first hole and 0.114 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
2.375 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.840 inches first hole -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-431-5225 MPN 5E4750/02-1R00Wire Wound Fixed Resistor
- 5975-00-655-1819 MPN 514828-2Electrical Conduit Elbow
- 4920-00-670-1582 MPN HS7605Interface Device Adapter Assembly
- 4920-00-670-1645 MPN HS7592Aircraft Maintenance Fixture
- 5905-00-717-7798 MPN 542185Precision Wire Wound Variable Resistor
- 4920-00-906-1264 MPN HS9808Fue Holding Fixture
- 4920-00-971-3916 MPN HS9093Aircraft Maintenance Fixture
- 5935-01-070-3283 MPN CP067C24Electrical Connector Retaining Plate
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-849-9332 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
726726-2 | Hamilton Sundstrand Corporation |
710086-4 | Hamilton Sundstrand Corporation |