NSN 5306-00-850-3731
Wheel Bolt
Between 1.428 inches and 1.448 inches fastener length, hexagon head style, between 0.120 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number R433D19U for national stock number 5306008503731.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-850-3731.
-
MPN or Model
R433D19U
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.815 inches and 0.940 inches -
Fastener Length
Between 1.428 inches and 1.448 inches -
Head Style
Hexagon -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.628 inches and 0.688 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Ams 5628 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-126-0739 MPN R984P7401AInductive Wire Wound Fixed Resistor
- 5935-00-671-2205 MPN 619E199G2Electrical Connector Bracket
- 5905-00-957-8819 MPN R983P1272BFilm Fixed Resistor
- 4920-00-981-9130 MPN 21C2021P011Pressure Manifold
- 4920-01-003-9434 MPN 518D547P3Weld Assembly Cover
- 4820-01-015-7476 MPN L22185P02Check Valve
- 4920-01-152-8397 MPN 3C3292G01Installation Aft Stator Ca Stand
- 5905-01-165-0663 MPN J165P6199AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-850-3731 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R433D19U | General Electric Co |
R433P19U | General Electric Company |
R433P19U | General Electric Co |