NSN 5306-00-851-5677
Coaxial Connector
Between 4.265 inches and 4.312 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 65160-00066-101 for national stock number 5306008515677.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-851-5677.
-
MPN or Model
65160-00066-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
Between 4.265 inches and 4.312 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4375 inches and 0.4380 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
Between 3.797 inches and 3.827 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4037 -
Material Specification
Ams 6300 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-027-8953 MPN 65207-01051-107Latch Fitting
- 1560-00-065-3477 MPN S6120-60907-14Latch Assem Support
- 4920-00-099-9010 MPN 65700-90241-041Adapter Se Transfer Arm Assembly
- 1560-00-121-4837 MPN S6122-87401-6Small Arms-fragmentation Protective Supplemental Armor
- 1560-00-232-0722 MPN 65201-01029-103Cockpit Seat Fitting
- 1560-00-336-0764 MPN S1620-61516Tail Wheel Supp Fitting Assembly
- 1560-00-520-6275 MPN S14-20-5133-1Fuselage Fitting Assembly
- 1560-00-570-4886 MPN S1635-61124Radiator Support Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-851-5677 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65160-00066-101 | Sikorsky Aircraft Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)