NSN 5306-00-851-5709
Coaxial Connector
Must meet strict inspection requirement.
Manufacturer part number BACB30LC12-40D for national stock number 5306008515709.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-851-5709.
-
MPN or Model
BACB30LC12-40D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
Between 3.526 inches and 3.546 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.490 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.1410 inches and 0.1510 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.289 inches first hole -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30lc manufacturers standard
More from these suppliers
- 1560-00-072-2249 MPN 65-33932-2Aircraft Access Door
- 1560-00-073-2443 MPN 107D3162-3Transmission Plate
- 1680-00-103-3183 MPN 25-9987-508Therma Curtain Assy
- 4920-00-268-2911 MPN TE65B98600Aircraft Maintenance Fixture
- 5930-00-335-4722 MPN 6-36878-3Electrical Switch Cover
- 1680-00-341-9425 MPN 9-60484-3Seat Pulley And Pin
- 4920-00-409-7686 MPN TE65-73701-34Aircraft Maintenance Fixture
- 5950-00-568-2809 MPN 240-2715-030Radio Frequency Coil
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-851-5709 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LC12-40D | The Boeing Company |