NSN 5306-00-851-9629
Coaxial Connector
1.594 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number S4649406-20 for national stock number 5306008519629.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-851-9629.
-
MPN or Model
S4649406-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.344 inches -
Fastener Length
1.594 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2494 inches and 0.2497 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.466 inches first hole -
Material
Steel -
Surface Treatment
Oxide grip -
Surface Treatment Specification
Qq-p-416 ty1 cl3 federal specification single treatment response threads -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-181-3748 MPN 5139449-16Main Lever Assembly
- 1560-00-214-7327 MPN 5329910-508Aircraft Door
- 1560-00-388-8037 MPN 2102848-2Cowling Fla Casti G
- 1560-00-657-5057 MPN 9667106-49Door Assy
- 1560-00-806-7182 MPN 4445373-2Bellcrank Support
- 1560-00-854-5271 MPN 4811914Handle Stop
- 6145-01-180-1596 MPN STD0056-20Electrical Wire
- 1680-00-425-7534 MPN 53-870006-5Slats Control Unit
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-851-9629 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S4649406-20 | Boeing Company, The |
S4649406-20 | Kitco, Llc |
S4649406-20 | Derco Aerospace, Inc. |
S4649406-20 | Boeing Company, The |