NSN 5306-00-853-5742
Coaxial Connector
1.378 inches fastener length, hexagon head style, 0.132 inches head height, width between flats: 0.435 inches .
Manufacturer part number 783617-7 for national stock number 5306008535742.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-853-5742.
-
MPN or Model
783617-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
1.378 inches -
Head Style
Hexagon -
Head Height
0.132 inches -
Width Between Flats
0.435 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4037 -
Material Specification
Mil-s-8695, cond c4 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-011-1463 MPN 3F41536-102Petal Door Hinge
- 1560-00-012-7717 MPN 3F31106-101Roller Conveyor Lock Assembly
- 1560-00-027-1352 MPN 762347-6Bracket Assembly
- 1560-00-047-3527 MPN 146738-3Shield Assembly
- 1560-00-070-4005 MPN 3F11512-101Aircraft Access Cover
- 1560-00-079-0362 MPN 389753-1Inboard Nacelle Fairing
- 1560-00-091-0977 MPN 934688-157Water Separator Blanket Assembly
- 1560-00-110-6213 MPN 4J32470-113AAircraft Fairing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-853-5742 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
783617-7 | Lockheed Martin Corporation |