NSN 5306-00-854-2682
Wheel Bolt
Between 1.425 inches and 1.440 inches fastener length, dee chamfer head style, 0.510 inches head diameter, head height: between 0.140 inches and 0.160 inches .
Manufacturer part number 6864857 for national stock number 5306008542682.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-854-2682.
-
MPN or Model
6864857
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.495 inches -
Fastener Length
Between 1.425 inches and 1.440 inches -
Head Style
Dee chamfer -
Head Diameter
0.510 inches -
Head Height
Between 0.140 inches and 0.160 inches -
Distance From Centerline To Flat
Between 0.189 inches and 0.192 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.920 inches and 0.930 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
24.0 rockwell c and 29.0 rockwell c -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-605-0039 MPN 23090279Pin Red Grey
- 5306-01-160-7357 MPN 9429510Machine Bolt
- 5306-01-441-2360 MPN 23007595-18Machine Bolt
- 6105-01-446-6968 MPN 23070291Motor Stator
- 5905-00-105-9610 MPN 6862400-08Inductive Wire Wound Fixed Resistor
- 5950-00-323-7552 MPN 6514650Power Transformer
- 4920-00-631-6593 MPN 6796688Aircraft Maintenance Fixture
- 4920-00-953-2828 MPN 6797971Com Holding Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-854-2682 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6864857 | Rolls-royce Corporation |
6864857 | Allison Transmission, Inc. |