NSN 5306-00-864-5002
Coaxial Connector
Between 1.545 inches and 1.592 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number EWSB26-8-16 for national stock number 5306008645002.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-864-5002.
-
MPN or Model
EWSB26-8-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.535 inches and 0.592 inches -
Fastener Length
Between 1.545 inches and 1.592 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 1.000 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.421 inches first hole -
Material
Steel or steel comp h11 -
Material Specification
Sps-m-107 fscm 56878 mfr ref 1st material response or ams6485 assn standard 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-008-5883 MPN NAS1101E06-20Machine Screw
- 5305-00-151-9930 MPN SFT22-5A22Close Tolerance Screw
- 5305-00-171-2561 MPN NAS1123E12Close Tolerance Screw
- 5305-00-324-8486 MPN 110179-3-6Close Tolerance Screw
- 5305-00-505-2822 MPN LS15267V3-21Machine Screw
- 5305-00-889-6864 MPN NAS1203-19Close Tolerance Screw
- 5305-00-929-4089 MPN NAS1101C04-3Machine Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-864-5002 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB26-8-16 | Sps Technologies, Llc |
EWSB26-8-16 | Sps Technologies, Llc |